tag:blogger.com,1999:blog-88150051094486097302024-02-08T08:02:36.326-08:00HiFiSounds.co.uk Squeezebox Touch Modificationhifisoundshttp://www.blogger.com/profile/10129126741744653455noreply@blogger.comBlogger2125tag:blogger.com,1999:blog-8815005109448609730.post-74192266022206455742012-05-19T00:00:00.000-07:002014-02-24T13:52:44.892-08:00Digital rail cap swaps.....OsCon SEPC<h2 align="center">
Reverse Engineering the power rails!!!!</h2>
<div class="separator" style="clear: both; text-align: center;">
<img border="0" src="http://i497.photobucket.com/albums/rr332/Trunky1812/Squeezebox%20Touch/SBTouchInfo.jpg" height="266" width="400" /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div align="center">
Spent a fair bit of time identifying various devices on the main board</div>
<div align="center">
There are 3 linear voltage regulators related to the DAC, clocking and audio processing.</div>
<div align="center">
U18 voltage regulator for the codec chip U12 Wolfson WM8974</div>
<div align="center">
U20 is the 3.3v voltage regulator for the clock section including U14,U15 and U33 which are generate and buffer both clocks and using logic switch the active clock frequency. U34 is buffer logic for the SPDIF out which also shares this regulator.</div>
<div align="center">
U21 is the 5V voltage regulator for the AKM4420 DAC both analogue and Digital. Its also provides the 5v feed for the touch screen.</div>
<div align="center">
</div>
<div align="center">
I'll fit 470uF OsCon SEPC solid polymer caps where possible on the digital supplies.</div>
<div align="center">
C144 is the main 5v rail cap (Replace the original cap)</div>
<div align="center">
Directly to the supply pins of U15 and U33 clock select logic (not in photo)</div>
<div align="center">
Directly across C133 & C131 for the DAC</div>
<div align="center">
Directly across U34 SPDIF Buffer logic (not in photo)</div>
<div align="center">
Output side of 3.3v reg across C106 (not in photo)</div>
<div align="center">
Output side of 5v reg across C135</div>
<div align="center">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://i497.photobucket.com/albums/rr332/Trunky1812/Squeezebox%20Touch/IMG_2089.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://i497.photobucket.com/albums/rr332/Trunky1812/Squeezebox%20Touch/IMG_2089.jpg" height="640" width="476" /></a></div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
Finally, the output of the DAC itself has caps in the signal path which are not required as there is no DC present on the audio output which can be seen as wire links in the above picture.</div>
hifisoundshttp://www.blogger.com/profile/10129126741744653455noreply@blogger.com1tag:blogger.com,1999:blog-8815005109448609730.post-51552617822815970982012-05-05T00:01:00.000-07:002014-02-24T13:53:03.545-08:00Hardware Mods part 1 - External PSU (historical)<div class="separator" style="clear: both; text-align: center;">
<a href="http://i497.photobucket.com/albums/rr332/Trunky1812/Squeezebox%20Touch/3adfc359.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://i497.photobucket.com/albums/rr332/Trunky1812/Squeezebox%20Touch/3adfc359.jpg" height="297" width="400" /></a></div>
<h2 align="center">
Squeezebox Touch Hardware Mods</h2>
<div align="center">
I've been running squeezeboxes for a good few years now and I still own and original SB and modified SB3<a href="http://hifisoundssb3.blogspot.co.uk/">(blog here)</a>. I've always been interested in the Transporter but I don't think it would be any better than the modified touch I'm using now.</div>
<div align="center">
Like most of these things, the place to start is at the wall wart switched mode power supply. These are used as they can be made very cheaply and can effortlessly provide higher current requirements. </div>
<div align="center">
Having experienced excellent results with over specified linear power supplies and my own low noise voltage regulator in various applications including the SB3 this is where I started.</div>
<div align="center">
</div>
<div align="center">
50VA toroidal transformer, Hexfred high speed diodes and 2 x 22,000uF Panasonic TSUP capacitors provide approve 11v DC unregulated which can provide in excess of 5A. Ultimately, the Touch will need a few power supply rails. The main 5v regulated rail and an unregulated rail to feed the clocks and new internal regulators.</div>
<div align="center">
Initially, the power supply with its low noise 5v regulator can supply the whole Touch in place of the original wall wart PSU</div>
<div align="center">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://i497.photobucket.com/albums/rr332/Trunky1812/Low%20noise%20Squeezebox%20PSU/IMG_0933.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://i497.photobucket.com/albums/rr332/Trunky1812/Low%20noise%20Squeezebox%20PSU/IMG_0933.jpg" height="297" width="400" /></a></div>
<div align="center">
</div>
<div align="center">
</div>
<div align="center">
</div>
hifisoundshttp://www.blogger.com/profile/10129126741744653455noreply@blogger.com